Getting Started with your M1: A

[JohnnyCautious]

Yarbo Lawn Mower M1 Quick Setup Checklist​

Step 1: Unpack and Prepare Components​

1. Main Components:
   
   • Yarbo Core: Inspect for any visible damage or wear.
   • Lawn Mower Module: Ensure all parts are clean and free of obstructions.
   • Blade Guard: Verify alignment and integrity.
   • Battery: Confirm it is fully charged and free of visible damage.
2. Accessories:
   
   • Halo Antenna: Check that it’s functional and compatible.
   • Adjustment Tools: Locate all tools needed for installation and configuration.
3. Connection Bolts:
   
   • Collect bolts needed for attaching the module and blade guard.

---

Step 2: Assemble the Lawn Mower​

1. Install the Lawn Mower Module:
   
   • Align the module with the Yarbo Core.
   • Use the provided bolts to secure the connection points, ensuring no wobbling or loose parts.
2. Attach the Blade Guard:
   
   • Position the blade guard over the cutting blades.
   • Secure it using the appropriate bolts, ensuring it is tightly fixed and blades rotate freely underneath.
3. Add the Halo Antenna:
   
   • Insert the antenna into its designated slot on the Yarbo Core.
   • Ensure it is securely connected for optimal signal reception.

---

Step 3: Insert and Check the Battery​

1. Battery Installation:
   
   • Slide the battery into the compartment on the Yarbo Core until it clicks into place.
2. Check Connection:
   
   • Verify the battery is snug and power is supplied to the device.

---

Step 4: Install and Use the Yarbo App​

1. Download the Yarbo App:
   
   • Locate the Yarbo App in your device’s app store and download it.
2. Set Up the Device:
   
   • Turn on the Yarbo Core.
   • Open the app, log in, or create an account.
   • Follow the app’s instructions to pair the Yarbo Core with your smartphone.
3. Calibrate and Configure:
   
   • Use the app to calibrate the mower.
   • Adjust the cutting height as needed.
   • Set mowing zones and boundaries for efficient operation.

---

Step 5: Perform Initial Checks​

1. Hardware Verification:
   
   • Double-check all bolts, especially those securing the blade guard and mower module.
   • Ensure no obstructions are present in the blades or cutting area.
2. Software Validation:
   
   • Open the app to check for firmware updates and complete any necessary installations.
3. Test Run:
   
   • Perform a short test run in a safe, clear area to confirm proper operation.

---

Step 6: Operational Readiness​

• Cutting Height: Adjust the cutting height to suit your lawn using the app or provided tools.
• Mowing Area: Clear the designated area of debris, rocks, and obstacles.
• Storage: After use, store the mower and battery indoors in a dry location.